Application of power simultaneously starts timing of the preset interval and turns the load ON. At the end of the timed period the N/O load contact opens, turning OFF the load. Power to the timer must be applied continuously throughout the time period. Removal of power causes the timer to reset to T = 0. A new cycle can start by re-application of input voltage. Control the timing of high power electric heaters, FHP motors, lamps, transformers and other high current loads rated less than 10 amps Resistive. CMOS digital circuitry is combined with high current output relay contacts. P/C board and internal components are encapsulated in a flame retardant molded housing, fitted with quick connect wiring terminals. Available in all standard voltages and frequencies. Fixed or adjustable timing from 0.1 seconds to 24 hours.
- High Current Timing Relay
- Solid State
- Encapsulated Module
- 10 Amp. Rating 1/3 hp.
- CMOS Digital Circuitry
- Environment Protected
- Tamper Proof
- No False Operate
- Small Size - 2" x 2" x 15/16"
- Lightweight - approximately 2.5 oz.
- Rugged
- Transient Protected to 6000V